46 美人魚 維修記錄 Mermaid Maintenance Record
美人魚 維修記錄 2015-2020
Mermaid Maintenance Record 2015-2020
開始維修港版美人魚
Started repairing the Hong Kong version of Mermaid
另一隻泡溶劑去除漆層，再用矽膠輪將表面處理平滑
The other is soaked in solvent to remove the paint layer, and then the surface is smoothed with a silicone wheel
繪製新頭雕的顏色，先畫上眼白
Draw the color of the new head sculpture, first draw the white of the eye
畫上眼線和眉毛及眼珠
Draw eyeliner and eyebrows and eyeballs
畫上嘴唇
Paint upper lip
畫上頭髮 噴上透明漆
Draw hair Spray clear paint
這個是按照原始方式繪製，沒有特別改變畫法
This one is drawn in the original way without any special changes
乾燥後再噴上消光漆
then spray matte paint after drying
開始處理塑膠件
Start processing plastic parts
拆解支架
Disassemble the bracket
用噴洗方式去除漆層
Remove the paint layer by spraying
由於鍍層不佳所以浸泡漂白水去除鍍層
Due to poor coating, soak in bleach water to remove coating
支架手臂無鍍層位置塗上遮蓋液
Apply masking fluid to the uncoated position of the bracket arm
噴洗溶劑去除漆層
Spray solvent to remove paint layer
只要是不合格的零件就浸泡漂白水去除鍍層
As long as the parts are unqualified, soak in bleach water to remove the plating
塑膠件去除鍍層完成
Finished removal of plating on plastic parts
人物的腳使用複製的方式來製作
The feet of the characters are made by copying
克隆件完成
Cloning is complete
架框布局
Frame layout
零件插上針
Pin on parts
再將零件固定到框上
Then fix the parts to the frame
拍攝電鍍前置作業建檔
Recording of electroplating pre-work files
金屬件黏好介面零件並插好針
The metal parts are glued to the interface parts and the pins are inserted
將零件固定到框上
Fix the part to the frame
拍攝電鍍前置作業建檔
Recording of electroplating pre-work files
完成電鍍後將零件整理好噴上第一透明漆
After finishing the electroplating, arrange the parts and spray the first clear paint
塗上遮蓋
Apply mask
噴上美人魚的紅色
Spray mermaid red
支架直接撕掉遮蓋
The bracket is directly torn off the cover
其他零件泡水去除遮蓋
Soak other parts in water to remove the cover
噴上透明漆
Spray clear paint
支架繼續遮蓋作業
Bracket continues to cover work
噴上透明黑
Sprayed with transparent black
去除遮蓋
Remove mask
開始克隆人物的零件
Start to clone parts of characters
費了很大功夫終於零件齊全
It took a lot of work to finally complete the parts
開始組裝零件
Start assembling parts
關節處打鉚釘固定
Rivet fixation at joints
鎖螺絲
Lock screw
組裝手指，先調整孔的大小再插入梢
Assemble the fingers, first adjust the size of the hole and then insert the tip
打上鉚釘固定
Fix with rivets
將頭移到新的身體上
Move the head to the new body
開始組裝
Start assembly
先組裝自製的腳
First assemble the homemade feet
鑽孔插上梢
Drill pin
人物端也需鑽孔
The character end also needs to be drilled
腳裝上去後素體就完成了
After the feet are installed, the body is complete
組裝支架
Assemble the bracket
星座型態完成
Constellation pattern completed
兩種型態都完成了
Both types are completed
完成維修
Complete repair
留言
張貼留言