42 紫水晶 維修記錄 Amethyst Repair record
紫水晶 維修記錄 維修中 2015-2018
Amethyst Repair record Under repair 2015-2018
開始維修港版紫水晶,先拆除零件
Start to repair the Hong Kong version of Amethyst, first remove the parts
克隆的頭雕先塗上眼白
The cloned head sculpt is painted with the whites of the eyes first
再畫上眼線
Draw eyeliner
畫上眼珠
Draw eyeballs
畫上瞳孔
Draw pupils
再點上反光點
Click on the reflective point
畫上毛髮
Paint the hair
完成後噴上透明漆 乾燥後再噴上消光漆
Spray clear paint after finishing, spray matte paint after drying
塑膠零件浸泡漂白水去除鍍層完成
Plastic parts are soaked in bleach water to remove the plating finish
黏上介面零件
Glue interface parts
處理支架零件
Handling bracket parts
拆解零件
Disassemble parts
浸泡漂白水去除鍍層
Soak in bleach water to remove plating
肩甲零件不足所以用克隆方式補足零件
The shoulder armor parts are not enough, so use the clone method to make up the parts
完成克隆零件
Complete the cloned part
開始架框布局
Start frame layout
零件插上針
Pin on parts
將零件固定到框上
Fix the part to the frame
拍攝電鍍前置作業建檔
Preparatory work for shooting electroplating
電鍍完成
Plating complete
整理完成的電鍍件
Finished plating parts
噴上第一層透明漆
Spray the first layer of clear paint
接著處理金屬零件
Then deal with metal parts
素體折出測試動作
Body folding test action
這素體是沒有問題的
There is no problem with this body
拆下金屬零件
Remove metal parts
泡溶劑去除漆層
Soak solvent to remove paint layer
去除漆層完成
Remove paint finish
再將金零件拋亮零件就能處理電鍍了
Then polish the gold parts to process the plating
開始遮蓋作業
Start masking
調色 這個顏色的構成為紅 藍 洋紅
The composition of this color is red, blue, magenta
插好零件
Insert the parts
噴上特調藍色
Spray with special blue
去除遮蓋
Remove mask
再次遮蓋另一個顏色 先黏上紙膠帶
Cover up another color again and stick paper tape
再與其他零件塗上遮蓋液
Apply masking fluid to other parts
洗出眼睛的鍍層
Wash out the plating of the eyes
洗出寶石的鍍層
Wash out the plating of gems
眼睛塗上紅色
Red eyes
黏上紙膠帶
Stick paper tape
骨頭噴上白色
Bones sprayed on white
噴上淡藍綠色
Spray light blue green
噴上透明漆
Spray clear paint
整理素體
Finish body
拆解素體零件
Disassemble the body parts
泡去漬油以去除熱溶膠
Soak scouring oil to remove hot melt
洗掉熱溶膠的零件再浸泡加了洗碗精的水
Wash off the hot melt parts and soak the water with dishwashing detergent
素體清理完成
Body cleaning completed
先去除大部分的水分
Remove most of the water first
無法處理的位置使用抽真空的方式讓水分汽化
Use vacuum to vaporize moisture in unmanageable locations
素體零件處理完成
Finished processing of body parts
組裝起來
Assembled
開始組裝鎧甲
Start to assemble the armor
完成組裝
Complete assembly
星座支架的骷髏頭部分用手塗來製造出質感
The skull part of the constellation bracket is painted by hand to create a texture
再噴上消光漆
Spray matte paint
去除遮蓋
Remove mask
組裝支架
Assemble the bracket
組裝鎧甲
Assemble the armor
後來有素體升級計畫 零件已製作完成
Later, there was a body upgrade plan, and the parts were completed
組裝好全新的素體
Assemble a brand new body
準備將已完成的移到新素體身上
Ready to move the completed to the new body
組裝完成
Assembled
完成維修
Complete repair
留言
張貼留言