返回 聖衣大系 維修文章入口 整合
天猛星 維修記錄 2016-2020
Tianmengxing maintenance record 2016-2020
天猛星官方的金屬零件表面不良率非常高,維修時需要特別費心處理
The surface defect rate of the official metal parts of Tianmengxing is very high, and special care is required during maintenance.
塑膠零件先用溶劑測試可否溶解漆層
First use solvent to test whether plastic parts can dissolve paint
準備噴洗塑膠零件
Prepare to spray plastic parts
洗掉漆層露出鍍層
Wash off the paint and expose the plating
金屬件顏色與塑膠的顏色差異很大
The color of metal parts is very different from that of plastic
塑膠零件先噴上透明漆保護鍍層防止氧化
The plastic parts are sprayed with transparent paint to protect the coating to prevent oxidation
金屬件拋光之後變亮了起來
The metal parts become brighter after polishing
所有金屬件拋亮完成
All metal parts are polished
鍍層的色差還是有
The color difference of the coating is still there
試組看看協調性
Test group to see coordination
開始第一次遮蓋
Start covering for the first time
星座隻架拆解
Constellation only frame disassembly
無鍍層處塗上遮蓋保護起來
Cover the uncoated area to protect it
鎧甲噴上透明黑
The armor is sprayed with transparent black
測試一下透明黑的協調性
Test the coordination of transparent black
拆下零件
Remove parts
去除遮蓋
Remove mask
噴上透明漆
Spray clear paint
翅膀黏好遮蓋噴上透明黑
The wings are glued and covered and sprayed with transparent black
乾燥後去除遮蓋
Remove cover after drying
手塗上紫紅色
Hand painted fuchsia
所有零件手工塗上紫紅色
All parts are painted in fuchsia by hand
看看顏色協調性
Look at color coordination
金屬腳浸泡溶劑去除漆層
Metal feet soak in solvent to remove paint
翅膀塗上遮蓋後噴上紫色
The wings are covered and sprayed with purple
金屬腳拋亮後噴上透明黑
The metal feet are sprayed with transparent black after polishing
乾燥後組上去
Group up after drying
手工塗上紫色
Painted purple by hand
第一版的維修完成
Repair of the first edition completed
星座隻架噴洗掉顏色之後露出鍍層
The constellation only shows the coating after spraying off the color
噴上透明黑
Sprayed with transparent black
乾燥後組裝起來
Assemble after drying
這樣就是完整一隻的零件
This is a complete part
接著處理第2隻要用的零件
Then process the second part
塗好遮蓋
Smear and cover
按照之前步驟上色
Follow the previous steps to color
第二隻的上色沒有完成就停擺了很久
The second one was stopped for a long time without finishing the coloring
好幾年後得到了幾隻損壞的零件 這次要以電鍍維修方式來製作
Several damaged parts were obtained after several years. This time they will be made by electroplating repair.
嚴重爆漆的金屬件是這隻的嚴重問題
Severely painted metal parts are a serious problem for this one
去除漆層之後
After removing the paint
用矽膠輪拋掉爆裂及拋光零件
Throw away cracked and polished parts with silicone wheels
表面處理完成
Finished surface treatment
處理塑膠零件
Handling of plastic parts
能夠噴洗去除漆層的零件就保留原始鍍層來使用
Parts that can be sprayed to remove the paint layer will retain the original plating layer for use
有嚴重磨損的鍍層就放棄使用
Give up on the heavily worn coating
泡漂白水去除鍍層
Soak bleach water to remove the coating
能使用的塑膠零件噴上透明漆防止氧化
Plastic parts that can be used are sprayed with clear paint to prevent oxidation
去除鍍層完成的翅膀
Finished wings with plating removed
要重新電鍍的零件準備布局架框
The parts to be re-plated prepare the layout frame
插上針再固定到框上
Insert the pin and fix it to the frame
拍攝電鍍前置作業建檔
Recording of electroplating pre-work files
連同之前第一版的金屬件一起重建鍍層,將零件固定到框上
Rebuild the plating together with the metal parts of the previous first edition, and fix the parts to the frame
拍攝好電鍍前置作業建檔
Take a good picture of electroplating pre-work and file
完成電鍍後整理好可用零件噴上透明漆
After finishing the electroplating, the available parts can be sprayed with clear paint
翅膀黏好遮蓋
The wings are glued to cover
與其他零件一起噴上透明黑色
Spray transparent black with other parts
去除紙膠帶
Remove paper tape
再泡水去除剩餘遮蓋
Soak again to remove the remaining cover
噴上透明漆
Spray clear paint
開始塗遮蓋
Start applying mask
翅膀噴上透明漆
The wings are sprayed with clear paint
用溶劑洗出銀色鍍層
Wash out the silver coating with solvent
塗上遮蓋
Apply mask
噴上紫紅色
Spray fuchsia
黏好遮蓋
Stick and cover
噴上紫色
Spray purple
胸甲泡水去除遮蓋
Breastplate soaking to remove cover
去除遮蓋完成
Remove the mask complete
其他零件直接撕掉遮蓋
Remove the cover directly from other parts
去除遮蓋後的零件一起噴上透明漆
After removing the covered parts, spray clear paint together
翅膀噴上紫紅色
Fuchsia spray on wings
乾燥後泡水去除遮蓋
Soak in water after drying to remove the cover
去除遮蓋後噴上透明漆
Spray clear paint after removing the cover
胸甲繼續塗遮蓋
The breastplate continues to be painted and covered
再黏上紙膠帶
Then stick paper tape
噴上紫色
Spray purple
泡水去除遮蓋
Soak in water to remove cover
去除遮蓋後噴上透明漆
Spray clear paint after removing the cover
多年後終於完成天猛星 這隻花了很多時間,亮度比起第一版再次進化更多
After many years, I finally completed the Skystar. It only took a lot of time, and the brightness has evolved more than the first version.
開始組裝
Start assembly
完成維修
Complete repair
留言
張貼留言