返回 聖衣大系 維修文章入口 整合
偽 射手座 維修記錄 2019
Pseudo Sagittarius maintenance record 2019
這是港版原件，這次的維修鎧甲使用全克隆件來維修，原件就當母件使用
This is the Hong Kong version of the original, this time the repair armor uses a full clone to repair,the original is used as the mother
開始設定模具分組
Start to set mold group
總分要成六組模具，開始埋油土
The total score should be divided into six groups of molds, and the oil and soil will be buried.
圍上積木壓出定位點
Press out the building blocks around the positioning points
薄灌一次矽膠
Thin filling once silicone
第二組也埋油土
The second group also buried oil and soil
一樣的步驟灌上矽膠
Fill the silicone in the same steps
第三組埋油土
The third group buried oil soil
第四組
Fourth group
厚度夠厚就可以灌石膏補強了
If the thickness is thick enough, it can be filled with gypsum
灌過石膏的模具乾燥時就能翻面去除油土
When the mold filled with gypsum is dry, it can turn over to remove oil and soil
清理完油土之後就能塗上凡士林了
After cleaning up the oily soil, you can apply petroleum jelly
再灌上矽膠
Refill with silicone
硬化後再灌上石膏補強
After hardening, pour gypsum to reinforce
第五組開始埋油土
The fifth group began to bury oil and soil
第六組埋油土
The sixth group buried oil soil
完成的模具就能拆除積木了
The completed mold can remove the building blocks
取出原件的模具就完成了
The mold for removing the original is complete
完成的模具就能開始灌注了
The finished mold can start pouring
相機有損壞產生的畫面
The camera has a damaged picture
陸續完成的模具都能灌注了
The completed molds can be poured
星座支架由於有鉚釘固定我不想破壞 只好使用原件處理
Because the constellation bracket is fixed with rivets, I don’t want to destroy it, so I have to use the original to deal with it.
分解能拆開的零件
Disassemble parts that can be disassembled
拆解完成
Disassembly is complete
陸續做出各部位的零件
Make parts for each part one after another
持續灌注中
Continuous perfusion
蓋上黑色鐵桶可以吸熱加速硬化
Covered with black iron barrel can absorb heat to accelerate hardening
持續灌注
Continuous perfusion
有些不良的零件要逐步排除問題
Some bad parts should be eliminated gradually
花了很多時間還未能完成一隻完整零件
It took a lot of time to complete a complete part
胸甲的不良率相當高
Breastplate has a high defect rate
就差胸甲
Breastplate
終於完成一隻完整的零件
Finally completed a complete part
頭盔的眼睛部位要進行不同的改造
The eye part of the helmet needs to be modified
將它挖空
Hollow it out
零件架框布局
Parts frame layout
將零件插上針
Insert the part into the needle
再固定到框上
Fix it to the frame
拍攝電鍍前置作業建檔
Shooting and pre-processing for electroplating
電鍍完成的零件整理好 (複製件的架框作業檔案漏掉了)
Finished parts after electroplating (the frame file of the copy is missing)
將零件插好
Insert the parts
噴上金色在噴上透明漆
Spray gold and spray clear paint
可以開始組裝支架了
You can start to assemble the bracket
頭盔的原始格式塗上遮蓋
Cover the helmet in its original format
噴上透明黑色
Spray transparent black
浸泡水去除遮蓋
Soak water to remove cover
頭盔噴上透明漆就完成了
The helmet is finished with transparent paint
零件全部完成可以組合鎧甲了
Armor can be combined when all parts are completed
腳的插槽碎了一個 這個塑膠又是加熱過度的變質品
There is a broken slot in the foot. This plastic is a metamorphic product that has been overheated.
開孔的頭盔可以看到裡面的眼睛
The open helmet can see the eyes inside
組合星座型態完成
Combined constellation pattern completion
製作第三種型態的支架
Making the third type of bracket
鋸成要的樣子
Saw it to the point
噴上不透明黑色
Sprayed with opaque black
再噴上消光漆
Spray with matt paint
準備組裝
Ready to assemble
這就是第3種分解型態
This is the third decomposition type
為了解決頭盔無法裝上去的情形,用一個模型板的頭來改造
In order to solve the situation that the helmet can not be installed, the head of a model board is used to transform
3種型態都完成了
All three types are completed
完成維修
Complete repair
留言
張貼留言