24 處女座 維修紀錄 Virgo maintenance record
處女座 維修紀錄 2014-2020
Virgo maintenance record 2014-2020
拆下所有鎧甲
Remove all armor
塑膠零件浸泡漂白水去除鍍層
Plastic parts soaked in bleach to remove plating
去除鍍層完成
Finish plating removal
金屬件浸泡溶劑去除漆層
Metal parts soaked in solvent to remove paint
用矽膠輪拋掉毛邊及不平整處
Use silicone wheels to throw away burrs and irregularities
此零件港版與日版的差別 精細度有差
The difference between the Hong Kong version and the Japanese version of this part
塑膠零件插上針
Insert a pin on a plastic part
再將零件固定到框上
Then fix the part to the frame
拍攝電鍍前置作業建檔
Shooting and pre-processing for electroplating
金屬零件黏上介面零件並插上針
Attach the metal parts to the interface parts and insert the pins
再將零件固定到框上
Then fix the part to the frame
拍攝電鍍前置作業建檔
Shooting and pre-processing for electroplating
電鍍完成後,剪下零件並且固定好,再噴上第一層透明漆
After the plating is completed, cut the parts and fix them, then spray the first layer of transparent paint
腰甲塗上遮蓋
Waistcoat covered
這幾個零件噴上淡金色
These parts are painted in light gold
其他零件噴上金色
Other parts are painted in gold
這些零件塗上遮蓋
Cover these parts
這幾個零件用溶劑洗出銀色鍍層,再手工塗上淡金色
These parts are washed with a silver coating with a solvent, and then coated with light gold by hand
頭盔零件手工塗上紅色
Helmet parts painted red by hand
浸泡水去除遮蓋
Soak water to remove cover
噴上透明漆
Spray with clear paint
人物型態的零件完成了
The character-type parts are completed
星座型態以模型版來製作
The constellation type is made with a model version
支架必須重新電鍍過
The bracket must be re-plated
剪下所有零件
Cut all parts
腰甲塗上遮蓋
Waistcoat covered
其他零件先噴上透明漆
Spray other parts first with transparent paint
腰甲洗出銀色
Waistplate washed out silver
浸泡水去除遮蓋
Soak water to remove cover
再噴上透明漆
Then spray with clear paint
這些零件塗上遮蓋
Cover these parts
噴上金色
Spray gold
支架噴上淡金色
Bracket painted light gold
準備去除遮蓋
Ready to remove cover
去除遮蓋後噴上透明漆
Spray clear paint after removing the cover
這三個零件再塗上遮蓋
Cover these three parts again
手工塗上紅色,乾燥後去除遮蓋
Apply red by hand, remove cover after drying
帽子黏合起來
Hats stick together
組合支架
Combination bracket
零件都完成了,準備開始組裝
The parts are complete, ready to start assembly
完成維修
Complete repair
留言
張貼留言