22 巨蟹座 維修紀錄 Cancer Maintenance Record
巨蟹座 維修紀錄 2015-2020
Cancer Maintenance Record 2015-2020
頭雕手繪上色,先畫眼白 眼線 眼珠
The head carving is painted by hand, first draw the white eyes, eyeliner, eyeballs
畫上瞳孔與反光點
Draw pupils and reflective dots
畫上眉毛
Draw eyebrows
畫上毛髮
Draw hair
完成後噴上透明漆,乾燥後再噴上消光漆
After completion, spray with clear paint, and then dry with matte paint
塑膠件浸泡漂白水去除鍍層後插上針
Insert the needle after the plastic parts are soaked in bleach to remove the coating
再固定到框上
Fix it to the frame
拍攝電鍍前置作業建檔
Shooting and pre-processing for electroplating
電鍍完成
Electroplating completed
接著處理金屬件
Then process the metal parts
浸泡溶劑去除漆層
Soak solvent to remove paint
去除漆層完成
Finish removing the paint layer
再用拋光膏擦一擦會變很光滑
If you rub it with polishing paste, it will become very smooth
再將零件洗乾淨
Then clean the parts
金屬件黏上介面零件
Metal parts are glued to interface parts
插上針
Insert the needle
再將零件固定在框上
Then fix the part on the frame
拍攝電鍍前置作業建檔
Shooting and pre-processing for electroplating
接著就可以電鍍成銀色了
Then it can be plated into silver
裙甲的寶石處塗上遮蓋,這些零件噴上淡金色
The jewels of the skirt are covered, and these parts are painted in light gold
再塗上遮蓋
Cover again
所有零件噴上金色
All parts are painted gold
去除遮蓋
Remove cover
要再次遮蓋的零件噴上透明漆
Spray clear paint on the parts to be covered again
繼續遮蓋
Continue to cover
插好零件
Insert the parts
噴上藍色
Spray blue
稍微撕開要再次上色的位置,再塗上遮蓋液
Slightly tear open the place to be colored again, then apply the masking liquid
噴上紅色
Spray red
去除遮蓋
Remove cover
頭盔塗上遮蓋
Helmet covered
手塗上紅色
Hand painted in red
乾燥後去除遮蓋
Remove cover after drying
所有零件噴上最後的透明漆
All parts are painted with the last clear paint
人物型態開始組裝
Character form begins to assemble
星座型態以模型版來製作
The constellation type is made with a model version
支架需要電鍍處理
The stent needs to be plated
電鍍完成
Electroplating completed
將零件剪下來
Cut the parts
插好零件
Insert the parts
支架噴上金色,其他噴上透明漆
The bracket is painted with gold and the other is painted with transparent paint
塗上遮蓋
Apply cover
紅點用手塗處理
Red dots painted by hand
再將紅點塗上遮蓋
Then cover up the red dots
用溶劑洗出銀色
Wash out silver with solvent
凹陷處塗上遮蓋
Cover the depressions
噴上藍色
Spray blue
噴上淡金色
Spray light gold
左右手塗上遮蓋
Cover with left and right hands
噴上橘金色
Spray orange gold
去除遮蓋
Remove cover
凹陷處邊緣塗上遮蓋
Cover the edges of the depression
再噴上藍色
Spray blue again
去除遮蓋此零件就上色完成
Remove the cover and finish the part.
插好所有零件噴上最後一層透明漆
Insert all the parts and spray the last layer of transparent paint
頭盔的寶石邊緣塗上遮蓋
The helmet's gem edges are covered
用溶劑洗出銀色
Wash out silver with solvent
塗上紅色
Painted red
零件完成了可以開始組裝
After the parts are completed, you can start assembly
維修完成
Repair completed
留言
張貼留言