18 蛇夫座 維修紀錄 Ophiuchus maintenance record
蛇夫座 維修紀錄 2015-2020
Ophiuchus maintenance record 2015-2020
開始維修蛇夫座
Start repairing snake constellation
把零件拆下來
Remove the parts
金屬件浸泡去漆劑去除漆層
Metal parts soaked in paint remover to remove paint layer
去除漆層完成
Finish removing paint layer
拆解星座支架
Disassemble the constellation bracket
所有塑膠零剪以溶劑噴洗去除漆層,這需在30秒內完成,鍍層只有30秒的防禦力
All plastic zero shears are sprayed with solvent to remove the paint layer,
which needs to be completed within 30 seconds, and the plating layer has only 30 seconds of defense
放置一段時間乾燥後才能噴透明漆
The transparent paint can be sprayed after being left to dry for a period of time
不合格的塑膠零件泡漂白水去除鍍層
金屬零件用矽膠輪拋磨
Silicone wheel polishing for metal parts
拋光完成
Polished
金屬件黏上介面零件在插上針
Metal parts stick to interface parts and insert pins
塑膠件也插上針
將零件固定在框上並拍攝電鍍前置建檔後
就可以送去電鍍了
星座支架的頭可以再一次分離零件
The head of the constellation bracket can separate parts again
開始遮蓋
Start covering
調透明淡紫色 顏色構成 洋紅+黃
Tone transparent lilac color composition magenta + yellow
試噴顏色
Test spray color
確定顏色可以後噴上顏色
After the color is determined, the color can be sprayed
調透明深紫色 色採構成為紅色+藍色
Tone transparent dark purple color composition is red + blue
測試顏色
Test color
插好零件
Insert the parts
噴上深紫色
Spray dark purple
面具泡水去除遮蓋
Mask soaked in water to remove cover
去除遮蓋後,所有零件噴上最後一層透明漆
After removing the cover, all parts are sprayed with the last layer of transparent paint
調星座零件的黃色 顏色構成為紅+黃+白
The yellow color of the constellation parts is red + yellow + white
噴上顏色
Spray color
它是消光的
It is extinct
噴上透明漆
Spray with clear paint
面具去除遮蓋完成
Mask removal is complete
再次塗上遮蓋
Cover again
用溶劑洗出銀色鍍層
Wash out silver coating with solvent
噴上淡紫色
Spray with lavender
乾燥後泡水去除遮蓋
Soak in water after drying to remove cover
噴上最後一層透明漆
Spray the last layer of clear paint
開始組裝鎧甲
Start to assemble armor
星座模式
Constellation pattern
維修完成
Repair completed
留言
張貼留言