新生 鳳凰座 維修紀錄 2015-2019
Freshman Phoenix Record Maintenance Record 2015-2019
因為新生鳳凰座經過太多次相同的重續,時間軸很難接得起來,稍微有點混亂
Because the new Phoenix has undergone the same renewal too many times, the timeline is difficult to connect, a little confusing
這是台盜版的複製頭雕
This is a pirated copy head carving
畫上眼白
Draw white eyes
畫上眼線
Eyeliner
畫上眼珠
Draw eyes
畫上瞳孔
Draw pupils
點上反光點
Reflective point
畫上毛髮
Draw hair
完成上色後需要噴上透明漆及消光漆
After finishing coloring, you need to spray clear paint and matte paint
原始港版的顏色及狀態
The color and status of the original Hong Kong version
拆解零件
Disassemble parts
支架的組裝方式須記錄起來,以免裝不回去
The assembly method of the bracket must be recorded so as not to go back
所有塑膠件泡漂白水去除鍍層
All plastic parts are soaked in bleach to remove plating
開始架框布局
Start frame layout
將零件固定到框上
Fasten the part to the frame
拍攝電鍍前置作業建檔
Filming pre-plating operations
用日版的頭雕翻模
Turn the mold with the Japanese version of the head carving
埋油土
Buried oil soil
圍上積木
Building blocks
灌滿矽膠
Filled with silicone
拆除積木
Demolish building blocks
取出原件
Remove the original
電鍍完成
Electroplating completed
拆解零件
Disassemble parts
泡溶劑去除漆層
Soak solvent to remove paint layer
去除完成的樣子
Remove the completed look
金屬件用矽膠輪拋亮,這樣電鍍起來才會漂亮
The metal parts are polished with silicone wheels, so that the plating will be beautiful
完成拋磨
Finish polishing
準備架框
Prepare frame
有些零件可以用這樣的方式來固定
Some parts can be fixed in this way
固定完成
Fixed completion
零件插上介面零件,再鑽孔插上針
Insert the parts into the interface parts, then drill and insert the pins
固定在框上
Fixed to the frame
拍攝電鍍前置作業建檔
Filming pre-plating operations
電鍍好的零件整理起來
Organize the electroplated parts
開始塗遮蓋
Start to cover up
噴上淺藍色
Spray light blue
插好要噴深藍色的零件
Insert the parts to be painted in dark blue
噴上深藍色
Spray dark blue
深藍色與淺藍色的顏色是相同的,差別在色彩濃度不同
The colors of dark blue and light blue are the same, the difference is in the color density
紅點的周邊遮蓋起來
The perimeter of the red dot is covered
腰甲把淺藍色區域遮蓋起來
Waistplate covers the light blue area
手塗上紅色
Hand painted in red
乾燥後直接再塗遮蓋把淺藍色區域都遮起來
After drying, cover directly to cover the light blue area
腰甲噴透明紅 頭盔噴上橘色
Waistcoat sprayed transparent red, helmet sprayed with orange
鳳凰尾巴凹陷處塗上遮蓋
Cover the Phoenix Tail Depression
腰甲直接再次塗上遮蓋
Waistcoat directly covered again
插好零件
Insert the parts
噴上紫色
Spray purple
去除遮蓋腰甲的顏色就都出現了
After removing the cover of the waistplate, the color appears
插好尾巴零件
Insert the tail parts
噴上紫色
Spray purple
日版頭雕畫上眼白
Japanese version of the head carving on the eyes
畫上眼珠
Draw eyes
點上反光點
Reflective point
開始畫毛髮
Start painting hair
完成上色
Finish coloring
噴上透明漆
Spray with clear paint
乾燥後噴上消光漆
Spray matt paint after drying
開始去除尾巴的遮蓋
Start to remove the tail cover
所有完成的零件噴上最後一層透明漆
All finished parts are sprayed with the last layer of clear paint
頭雕有兩種版本 這邊選擇日版
There are two versions of the head carving.
開始組裝
Start assembly
組裝星座模式
Assemble the constellation pattern
完成
carry out
留言
張貼留言