02 初代 白鳥座 維修紀錄 The first-generation Shiratori maintenance record
初代 白鳥座 維修紀錄 2015-2018
Maintenance record of the first-generation Shiratori 2015-2018
以金色台版來維修記錄
Use the golden version to maintain records
拆下零件
Remove parts
泡油漆去除劑去除透明油漆 (這是硬化型油漆的去除方式 如用一般溶劑會沒有作用的)
Bubble paint remover to remove transparent paint (this is the way to remove hardened paint, it will not work if you use a general solvent)
去除漆層完成
Finish removing paint layer
清點塑膠零件
Inventory of plastic parts
泡漂白水去除塑膠件的鍍層 比例漂白水1:水1
Bleaching bleach to remove the coating of plastic parts Ratio bleach 1: water 1
去除完成
Removal complete
金屬件有毛邊及雜點都要用矽膠輪拋亮,拋完之後用溶劑洗乾淨
Metal parts with burrs and miscellaneous points should be polished with silicone wheels, and washed with solvent after polishing
金屬表面光亮許多
Metal surface is much brighter
準備架框的布局
Prepare the frame layout
塑膠件如有毛邊要先用刀子修過,這樣電鍍完才會漂亮
Plastic parts should be repaired with a knife if they have burrs, so that they will be beautiful after plating
修完毛邊簡直就變成日版了
After finishing the burrs, it becomes a Japanese version.
塑膠件插好絲針
Insert the plastic needle
再固定到塑膠框上
Then fix it to the plastic frame
拍攝電鍍前置作業建檔
Filming pre-plating operations
不同塑膠框的零件也是一樣的流程
The same process for parts with different plastic frames
金屬件的架框需要黏上一個塑膠零件當作插針的介面
The metal frame needs to be glued with a plastic part as a pin interface
固定在塑膠框上
Fixed on plastic frame
拍攝電鍍前置作業建檔
Filming pre-plating operations
電鍍完成後剪下零件
頭雕開始上色,畫上眼白
The head carving begins to color, and the eyes are painted
畫上眼線
Eyeliner
畫上眼珠
Draw eyes
畫上瞳孔
Draw pupils
點上反光點
Reflective point
顏料如果泡泡太多也可以抽真空來消除氣泡
If there are too many bubbles in the paint, you can also vacuum to eliminate the bubbles
畫毛髮的位置
Draw the location of the hair
完成
carry out
腰甲及頭盔塗好遮蓋之後噴上各自顏色
After covering the waist armor and helmet, spray them with their respective colors
乾燥後泡水去除遮蓋
Soak in water after drying to remove cover
單色零件噴上透明漆
Monochrome parts sprayed with transparent paint
去除遮蓋的零件也噴上透明漆
The parts that are covered are also sprayed with transparent paint
星座型態的鳥頭也塗好遮蓋噴上透明紅色
The constellation-shaped bird's head is also painted and covered with transparent red
乾燥後泡水去除遮蓋
Soak in water after drying to remove cover
頭盔塗上遮蓋再手塗嘴巴及眼睛
乾燥後泡水去除遮蓋
Soak in water after drying to remove cover
噴上透明漆
Spray with clear paint
腰甲手繪黑色的部分後再跟上透明漆
Waist armor painted with black parts and followed by transparent paint
開始組裝所有零件,包含更換頭雕
Start to assemble all parts, including replacing the head carving
留言
張貼留言